TITAN FOG-360

DISINFECTANT FOG SOLUTION

TITAN FOG-360 is a disinfectant fogging solution that eliminates germs and removes malodor from the treated area. Designed to be compatible with thermal foggers, the oil-based formulation produces small diameter droplets which are capable of ensuring extensive fog coverage for hard-to-reach areas. In addition to eradicating viruses and bacteria, the fog targets malodor particles and breaks them down to effectively deodorize areas.

FEATURES & BENEFITS:
• Generates fine fog particles that can penetrate hard-to-reach areas.
• Broad-spectrum bactericide and virucide
• Eliminates malodor and its sources

DIRECTIONS FOR USE:
1. Prior to fogging, clean the area to be treated to remove any dust, dirt, and debris that can affect the disinfection process. Prevent contamination by removing or protecting any medical or food materials.
2. Wear appropriate PPE to protect the eyes, face, and skin.
3. Prepare a sufficient volume of TITAN FOG-360 based on the area coverage. The machine will consume approximately 1.21ml of product for every cubic meter of room area.
4. Close all doors, windows, or other forms of ventilation. Load the disinfectant solution in the thermal fogger.
5. Assign personnel to handle the machine while the rest must vacate the area. Once ready, begin dispensing the fog. The machine consumes approximately 24ml of product per minute. After the operation, shut off the machine and vacate the area as well.
6. Leave the area for a minimum of two hours after fogging (one hour for sanitation, and another hour for fog dissipation). Food contact surfaces and medical devices must be washed and rinsed prior to reuse.

NOTE: Consult your Oxypro representative for specific details of use such as handling and equipment.

PACKAGING:
liter

STORAGE & CONDITION:
Store in a cool and dry place where temperatures do not exceed 30oC. Keep tightly capped and in an upright position.

PRECAUTIONS:
Keep out of reach of children. Avoid breathing mist or vapor by wearing a mask. Avoid contact with eyes and skin. If this product touches the eyes, rinse thoroughly under gently running water for a minimum of 20 minutes. If skin contact occurs, wash with soap and rinse thoroughly with water. If swallowed and the patient is conscious, administer milk or water and call a physician immediately. Do not induce vomiting.

Related Products

Scroll to Top

Technical Data Sheet Request Form